Ozone & UV-C (11)

The CLEARRAY® system uses UV-C technology to neutralize waterborne pathogens, rendering them useless. CLEARRAY® will also help reduce the amount of sanitizer you use in your hot tub, providing you with clean, fresh clear water. For the cleanest, softest water possible. No more drying out, no more red-eye.  The CLEARRAY® bulb needs to be replaced once a year. Detailed instructions on replacing your ClearRay bulb can be found here.   Replacement recommended every 12 months. 

Replacement quartz tube for all years of Jacuzzi® Hot Tubs & Sundance® Spas

Replacement electrode ionizer.

6000-374 - Compression Washer for Quartz Seal Nut 6472-841 - Replacement UV Sanitizer Bulb (Yearly Replacement Req'd) 6472-859 - Replacement UV Sanitizer Quartz Tube 6000-444 - Ballast: UV unit for 240V AMP *special order 6000-449 - Ballast: UV unit for 230V DSMT *special order  Unfortunately, we cannot provide an ETA for special order items. Items placed as Special order are non-refundable, and orders for special ordered items cannot be cancelled.Please see our refund policy at https://www.hottubstore.ca/pages/refund-policy for more information.If a special order item is ordered with other non-special order items, it will delay the entire order.

6472-722, 3rd Generation UV Unit, 240V 50/60Hz, AMP Connector, Fits all J-500, 2016+ J-400, 2016+ J-300 (240V), 2018+ J-200 (240V) and 2018+ J-100 (240V) Spas. 6472-726, 3rd Generation UV Unit, 240V 50/60Hz, DSMT Connector, Fits all 2015 and earlier J-400, 2015 and earlier J-300 (240V), 2017 and earlier J-200 (240V), and 2017 and earlier J-100, and all JLX series spas 

Note: These items may not be in stock and may be delayed. Note: These items are non-refundable. Please ensure that you are purchasing the correct model. You can use the chat to communicate with our team to verify your parts. 6473-150, Ozone: 220V APG; 2002-2011 (can be used in place of 6473-124 below) 6473-124, Ozone: Premium Model. Replaced: 6473-126, 6473-125A and 6473-124A. 2002-2011 - no longer available 6000-953, Ozone to Molex adapter for 240V Ozone generators (required for all 2002-2004 Jacuzzi Hot Tubs)

Aftermarket ClearRay Pro3Tect Ozone Kit for 240V Jacuzzi Hot tubs. Compatibility with 240V tubs only: J-500: All J-400: 2016+ J-300: 2016+ J200: 2018+ J100: 2018+ Includes all necessary components, hardware and instructions for installation. 6472-529, 240V, AMP circuit board connection; complete ozone kit.

6540-859, Injector: Bowles, Ozone; Fits All 2005+ Models

Replacement UV bulb only* for AquaNova UV/Ozone system found in Celebrity Hot Tubs. The AquaNova UV/Ozone system requires a replacement bulb every 10,000 hours or when the bulb has burnt out.The system light will flash yellow after 10,000 hours or red if it's non-operational (e.g. bulb has burned out).

6472-728, 3rd Generation UV Unit, 120V 60Hz, AMP Connector, Fits all 2016+ J-300 Convertible models and 2018+ J-200/J-100 convertible models (North America) 6472-721, 3rd Generation UV Unit, 120V 60Hz, DSMT Connector, Fits all J-300 Convertible models 2015 and older, and J-200/J-100 convertible models 2017 and older (North America) Replaces all 1st and 2nd Generation 120V units.

510002, Ozone Kit: Complete, 110/240V 50/60Hz 403512, Ozone: Fitting, swirl DSG w/gasket (not shown)