Tip: Download the AquaChek Smart app to make water balancing a breeze. Know "what" and "how much" based on your strip colours. Sanitize your hot tub with Jacuzzi Chlorinating Granules Jacuzzi Brand Chlorinating Granules is a stabilized chlorine for your spa that provides effective sanitation as a soluble, quick-dissolving oxidation treatment. Promoting water clarity, eliminating odours and organic waste such as body oils and cosmetic products. This powerful sanitizer is fast dissolving and can be used for both regular daily chlorination as well as super chlorination. Chlorine will not affect pH or total alkalinity nor will it promote scale build-up. The chlorine level in your spa should be maintained between 1-5 ppm. Ideal spa pH: 7.2-7.8 Ideal spa Alkalinity: 100 - 160 ppm  Size: 1.5 kg or 720g Click here for Safety Data Sheet (SDS)

Tip: Download the AquaChek Smart app to make water balancing a breeze. Know "what" and "how much" based on your strip colours.   Jacuzzi Spa Shock removes non-living organics and other contaminants from your hot tub without adding stabilizer, chloramines (which makes that "chlorine" smell) and frees up the chlorine to attack bacteria for a hot tub that is extra clean. More than that, Jacuzzi Spa Shock instantly gets rid of chloramines to make chlorine more effective and your tub smell and feel fresher. Using Jacuzzi Spa Shock will lower the amount of chlorine you use in your hot tub. Spa Shock is used in combination with your choice of sanitizer (bromine or chlorine) to restore water quality and boost sanitizer levels. For the most effective use, add after every use of the hot tub and only add chlorine as needed (when levels drop below 3ppm). For best results, add Jacuzzi Spa Shock before adding chlorine. First, add Spa Shock and run the jets with the cover open for 20-minutes. Then add chlorine and run your jets for 20-minutes with the cover open.     Size: 1 kg or 3kg Click here for Safety Data Sheet (SDS)

Reduces foul odours and foaming by absorbing oils, lotions, make-up and other contaminants. Helps keep your water clean and clear. Traps and removes odours, oils, and unfilterable debris Zero maintenance solution that lasts 30-90 days Reduces filter wear Features Absorbs up to 20 times its weight in body oils, suntan lotions, beauty products and more. Available individually or in a 3-pack Lasts 30-90 days Directions Toss into your spa or tie off near filter(s). Replace when the Zorbie starts to sink DO NOT SQUEEZE OR RING OUT

Tip: Download the AquaChek Smart app to make water balancing a breeze. Know "what" and "how much" based on your strip colours.   AquaCheck Chlorine Test Strips check for Chlorine, pH, Total Alkalinity, Cyanuric Acid (Stabilizer). Ideal for customers who use chlorine as the sanitizer in their pool or spa. Includes a test for Cyanuric Acid (Stabilizer), which is especially important for outdoor pools and hot tubs that are subject to chlorine dissipation from UV rays. Just dip an AquaChek Yellow strip in your pool or spa water for one second and remove it immediately.  Contains: 50 test strips  

Raise your pH with Jacuzzi pH UP.  Maintain a pH level of between 7.2 - 7.8 Size: 750 g

Reduce your pH and alkalinity with Jacuzzi pH Down. Maintain a pH level of between 7.2 - 7.8 for safe and clean water.  Size: 1 kg  Click here for Safety Data Sheet (SDS)

Raise your Alkalinity with Jacuzzi Brand Alka Up Alka-Up will prevent erratic changes in the pH level of your spa water while helping the bromine or chlorine work more efficiently.  Alka-Up also raises the total alkalinity of your spa water, while preventing any corrosion that can be caused by low alkalinity. It is a completely soluble powder that is broadcast into the water as needed. Test regularly and adjust, especially when fresh water is added. The ideal level of total alkalinity is between 80-120 ppm. Total alkalinity should always be balanced before adjusting pH levels. One capful holds approximately 25 g.  Size: 750 g  Click here for Safety Data Sheet (SDS)

Effectively decreases and removes harmful residue from your spa's internal plumbing system with Jacuzzi Brand Whirlpool Rinse. Add Jacuzzi Whirlpool Rinse to your hot tub before draining. Size: 500 ml   Click here for Safety Data Sheet (SDS)

Title: The Plunge Standard Filters (6 Pack) Pack of six 20-micron filters for the standard Plunge. Compatible with The Plunge (Gen 1) Standard model and Evolve Standard Chiller. Used with the Culligan filter housing (blue handle). Not compatible with Plunge All-in models or Evolve Pro Chiller. Recommended to replace every month (with daily use), and a bi-weekly clean if experiencing high volumes of dirt or debris.

Pack of six of 20-micron filters for the commercial Plunge. Compatible with The Plunge (Gen 1) Commercial model. Used with the GE filter housing (grey handle). Not compatible with The Plunge (Standard), Evolve Pro Chiller, or Plunge All-in models. Recommended to replace every month (with daily use), and a bi-weekly clean if experiencing high volumes of dirt or debris.

All the chemicals you need to get started with your Plunge in one bundle.  The Plunge Starter Kit Includes: Chlorine 720mg Chlorine Test Strips  pH Down 1kg  Alka Up 750mg  Spa Shock 1kg  Plunge Water Care Card Click here for Safety Data Sheets (SDS)