Jacuzzi Hot Tub Parts (184)

J-485, J-475, J-445, J-435 2019+ & J-495, J-425 Models 2020+ 6560-508, Light: LED Footwell, RGB 12V 2017 (Nut And 2 O-Rings Included) 6560-485, Cable: Harness, 2-Way Split Y- Cable (J-435 and J-445 Only) 6560-726, Light: LED Dual 12V, 17"& 17"(Yellow) 6560-729, Light: LED Dual 12V 6"& 6"(J-475 and J-485 Only) 6560-732, Light: LED Quad 12V 16&16&16&16 (Yellow) 6560-491, Harness, Light 12V (Can be used in place of 6560-485 & 6560-498) J-485, J-475, J-445, J-435 2019+ & J-495, J-425 Models 2020+ 6560-358, Housing: LED indicator 6541-089, Base: Indicator light 6540-595, Flange: Indicator light 6540-592, Plate: Logo indicator light J-445 & J-435 Models Only (10/2017-2018) 6560-508, Light: LED Footwell, RGB 12V 2017 (Nut And 2 O-Rings Included) 6540-994, Lens: JHT Topside Logo Light (Nut And Gasket Included) A. 6560-356, Housing (Only): Exterior Light J-400 2017 B. 6560-759, Light Assembly (Light only): Ext Corner J-400 2017  6560-491, Harness, Light 12V (Can be used in place of 6560-485 & 6560-498) 6560-485, Cable: Harness, 2-Way Split Y- Cable (J-435 and J-445 Only) 6560-726, Light: LED Dual 12V, 17"& 17"(Yellow) 6560-732, Light: LED Quad 12V 16&16&16&16 (Yellow) J-400 Series (09/2015 - 2018) & J-415, J-425, J-495 (2019) (Incompatible with J-445 & J-435) 6560-971, Light: LED Footwell, RGB 12V 2016 (Nut And 2 O-Rings Included) 6540-994, Lens: JHT Topside Logo Light (Nut And Gasket Included) 6560-966, Light: Waterfall J-400, 12V 2016 (Complete) 6560-603, Lens: Pillow Light J-400 (mid 2009+ excluding J-445 & J-435) 6560-205, Lens: Pillow Light J-400 with mini-DIN connector (mid 2013-2015 excluding J-445 & J-435) 6560-303, Light: LED Quad 12V 54" 6560-968, LED Light: Single Bullet, 70"(Yellow) J-400 Series (09/2015 - 2018) & J-415, J-425, J-495 (2019) (Incompatible with J-445 & J-435) 6560-972, Cord: Light MiniDin-7-MiniDin-7, 7' (Yellow) J-400 Series (2013-2014) 6560-183, Light: Waterfall J-400 Clip On with mini-DIN Plug 2013 J-400 Series (2006-2014) 6560-115, 2013+ Light: Logo Seat Assembly with mini-DIN connectors and 2 O-Rings (4 O-Rings and 2 Nuts are required; purchased separately below) 6540-514, O-Ring: EPDM 1.22"ID, Double 6540-685, Nut: Accu-pressure 6560-183, Clip-on waterfall light (2006-2012) replaces 20096-001 and requires 6000-362 20263-001, Harness: Waterfall feature, 2 into 1 J-400 Series (2015-08/15) 6560-958, Light: LED Quad Pin 54"

Note: Not all hi-limit sensors may not be in stock and delivery times may be delayed. Hi-limit sensors are non-refundable/non-returnable.   Use the chart below to determine which hi-limit sensors are compatible with your hot tub. Please note: all hi-limit sensors except 6600-168 are used for LED top-side controllers. If your J-300 series has an LCD controller, do not use an LED hi-limit sensor. Please contact or chat with us if you are unsure.  6600-140, Sensor: Hi-limit LED Series with Connector; Includes Curled Finger Contacts (32" cable) 6600-144, Sensor: Hi-limit LED Series without Connector; Includes Curled Finger Connectors (32" Cable) 6472-525, Harness: Hi-Limit LX 2-Pin (32" Cable)  6600-179, Sensor: Hi-limit J-400 Series (DSMT Connector for J-1000) (37" Cable) 6600-110, Sensor: Hi-limit with Box End Connectors (90" Cable) 6600-129, Sensor: Hi-limit J-300/J-200 LED with Curled Finger Connectors *Special order 6600-168, Sensor: Hi-limit J-300/J-400 LCD with Box End Connectors 6000-093, Sensor: Hi-limit Disc ( All models) 6600-140 6600-144* 6472-525 6600-179 6600-110 6600-129** 6600-168 (LCD) J-LX/J-LXL 2011+ 2011+ J-500 Series (all) 2015+ J-400 Series (all) Sept 2015+ 2010-Aug 2015 2006-2009 2006-2009 LCD J-300 Series (all) 2016+ 2002+ LCD J-310 2002-2003 2002-2003 J-315 2013-2016 2004-2017 2004-2015 J-320 2002-2003 J-325 2013-2016 2004-2017 2004 & 2008 & 2012-2015 J-330 2002-2003 J-335 2013-2016 2004-2017 J-340 2002-2003 J-345 2013-2016 2004-2017 J-350 2002-2003 2002-2003 J-355 2013-2016 2007-2017 2004-2006 2004-2006 J-360 2002-2003 2002-2003 J-365 2013-2016 2007-2017 2004-2006 2004-2006 J-370 2002-2003 2002-2003 J-375 2013-2016 2007-2017 2004-2006 2004-2006 J-380 2002-2003 2002-2003 J-385 2004-2006 2004-2006 J-200 Series (all) 2018+ J-210 2012-2017 2005-2017 J-220 2005-2017 J-230 2012-2017 2005-2017 J-235 2012-2017 2012-2017 J-245 2012-2017 2012-2017 J-270 2012-2017 2007-2017 J-275 2012-2017 2012-2017 J-280 2012-2017 2007-2017 J-100 Series (all) 2012-2017 2018+ Del Sol All   *Can use 6600-140**Can use 6600-144

J-280 Models (2007+) 2540-239, T-Valve: Cap And Knob 2540-274, T-Valve: Knob 2540-273, T-Valve: Cap 6541-241, O-Ring: Stem 6541-240, O-Ring: Body 6541-242, Gate Valve (T-Valve) 2540-275, Fitting: Wall T-Valve (6541-238 Nut Included) 6541-238, Nut: Diverter 6541-236, Body Assembly: T-Valve (Includes one each of items 4 through 6 above) J-210 (2005+) A 6541-800, Jet Face: Divert-A-Jet (Graphite Color for 2012+ J-210 Models) B 6540-800, Jet Face: Divert-A-Jet (Gray 2011 And Older Models) *Special Order 6540-797, Wall Fitting: Divert-A-Jet 6540-511, O-Ring: Divert-A-Jet 6540-798, Nut: Divert-A-Jet 6540-796, Jet Back: Divert-A-Jet

Compatible with:  J-210 2012+ J-215 2016+ J-225 2016+ J-235 2014-2019 J-245 2014-2019 J-275 2014-2019 J-280 2014-2019 2540-261, Jet Face: 200s Micro (DX Jet, Grey)B 2540-265, Jet Face: 200s Micro (DX Jet, Stainless Steel) 2540-255, Jet Face: 200s Accu Pressure (DL Jet, Stainless Steel) 2540-245, Jet Face: 200s Pulsator (DV Jet , Stainless) 6541-576, Jet Face: Classic PRO Pulsating 6541-577, Jet Face: Classic PRO Accu Pressure 6541-612, Jet Back: 200s (Nut And O-Ring Included) 6540-854 6541-801, O-Ring: 200s 6541-614, Washer: 200s (Self Leveling)

Waterfall Returns J-LX, J-500, J-300, J-200, J-100 Series 6540-979, Drain: Gravity Drain with Cover 1-1/32"? 6540-682, O-Ring, 1.22" ID X 1 0.158" C/S (2 Req'd.) 6540-685, Nut, Accu- Pressure Jet Waterfalls (J-200/J-100 Series) 6540-925, Cover: Waterfall Gray (Plastic) 6000-530, Cover: Waterfall (Stainless Steel) 6540-921, Fill Spout: Waterfall (Clear Plastic) 6541-285, Gasket: Waterfall 6570-121, Washer: Split Lock, 5/16" Stainless Steel (2 Req'd.) 6570-120, Bolt: Hex 1/4-20 x 1", Stainless Steel (2 Req'd.) 2540-004, Adapter: 3/4" Slip x FPT 6540-262, Adapter: 3/4" Spigot x 3/4" Barb  

Jacuzzi Brand Pillow for J-LX Collection. 2472-006 Replaces: 6455-485

Compatible with:  J-LX/LXL Series 2015-2019  J-315 2016+  J-325 2016+  J-355 2014+  J-345 2014+  J-355 2014+  J-365 2014+  J-375 2014+  J-385 2016+  J-415 2014-2019  J-425 2016-2019  J-435 2018+  J-445 2018+  J-465 2016-2017  J-470 2016-2018  J-475 2019+  J-480 2016-2018  J-485 2019+ J-495 2016+  J-575/585 2015+ 1a. 6541-170, Jet Face: Mini PowerPro FX-1 PC with Stainless Steel Escutcheon, 2015+ (Dark Gray)1b. 20285-001, Jet Face: Mini PowerPro FX with Stainless Steel Escutcheon (Light Gray - 2/2004 - 2014) 6540-555, Jet Face: Mini PowerPro FX without Stainless Steel Escutcheon (See Note) 6540-556, Jet Back: Mini PowerPro FX 6541-098, O-Ring: EDPM 1.98" I.D. x 0.163", Double 6540-639, Washer: Self Leveling Mini PowerPro FX 6540-557, Nut: Mini PowerPro FX, 2004+

  Some parts may not be in stock at time of order. Unfortunately, we cannot provide an ETA for special order items. Items placed as Special order are non-refundable, and orders for special ordered items cannot be cancelled. Please see our refund policy at https://www.hottubstore.ca/pages/refund-policy for more information. If a special order item is ordered with other non-special order items, it will delay the entire order. 2540-366, Jet Face: PowerPro LX w/316SS Escutcheon, 2007+6541-470, Jet Face: PowerPro LX w/o 316SS Escutcheon, 2007+6540-760, Jet Face: PowerPro LX, 2002-2006 *Discontinued6000-363, LX Jet Face Conversion Kit (Not Shown) 5-1/4" 6540-761, Jet Back: PowerPro LX, 2002+  *Discontinued in Canada 6541-472, JET: JETBACK, POWERPRO LX JET (2007+) *Special Order 6541-394, O-Ring: Triple 3.42 I.D 6540-763, Washer: Self Leveling PowerPro LX 6540-762, Nut: PowerPro LX, 2002+, *Special Order 6541-471, Ring: PowerPro Jet Back Adapter (Adapts older 2006 Jet Backs 6540- 760 and 6540-761 above to accept current 2007+ Jet Faces 2540-366 and 6541-470).

Air control valves are available for sale for the J-400 Series by Jacuzzi® Hot Tub. The air control valve is suitable for all hot tub models, but the part number will change depending on the model: individual air control components and their specifications are listed below: J-400 Air Components (2006+) Air Control Valve (All J-435, J-445, J-475, J-485, & 2020+ J-425, J-495) 6541-142, Control: Air Toggle Switch 6541-143, Gasket: Toggle Outer Shell 6541-144, O-Ring: Toggle Inner Shell 6540-375, Manifold: Air Control Jacket 6540-911, Nut: Push Button Air Control 6540-910, Elbow: Push Button Air Control  Air Control Valve (All other J-400 Models) 20101-001, Knob: Air Valve 6540-377, Control: Air Body And Stem 6540-522, O-Ring: EPDM, 1.64" ID x 0.163" 6540-375, Manifold: Air Control Jacket 6540-376, Nut: Air Control 6000-179, Knob Stem 6000-016, Cup (Long) 6000-029, O-Ring  Filter/Skimmer Air Bleed Line 20216-001, Check Valve: 3/4" Air 6540-024, Adapter: 1/2" Spigot x 3/8" Barb 6570-491, Clamp: Metal Hose (Black) IX Jet Air Bleed Check Valve 20216-001, Check Valve: 3/4" Air 6540-065, Adapter: 1" Spigot x 3/4" Barb 6570-033, Clamp: 27mm J-400 Air Bleed Line (2009+) 6540-252, Nut: Air Injector 6540-228, O-Ring: EPDM 0.662" ID x 0.210" 6541-263, Injector: Air PVC Gray J-500 Series Air Components (2015+) 6541-142, Control: Air Toggle Switch 6541-143, Gasket: Toggle Outer Shell 6541-144, O-Ring: Toggle Inner Shell 6540-375, Manifold: Air Control Jacket 6540-911, Nut: Push Button Air Control 6540-910, Elbow: Push Button Air Control J-500 Air Bleed Line Fitting (2015+) 6540-252, Nut: Air Injector 6540-228, O-Ring: EPDM 0.662" ID x 0.210" 6541-263, Injector: Air PVC Gray

Compatible with All J-LX & J-LXL Models (2011+) All J-500 Models (2015+) All J-400 models except J-415 (Jan 26, 2012+) J-415 Models (October 2, 2013+) J-385, J-375, J-365, J-355 Models (2012+) J-345, J-335 Models (2012-8/11/15) 6500-907S, LX Pump: 240V 60Hz, 48 Frame, 3'Oclock (1.5" Unions); 13.7" overall length Mounting Hardware (All Models)6570-011, Insulator: 1" x 1.5" Rubber (4 Required) 6570-126, Nut: Hex 5/16-18 (4 Required) 6570-127, Washer, Split-Lock 5/16 ( Discontinued in Canada) no alternative.

J-300 Series (2020+) 6560-969, Adapter: DCU Expansion Box 12V, 2016 (Yellow) 6560-971, Light: LED Footwell, RGB 12V 2016 (Nut And2 O-Rings Included) 6560-301, Light: LED Quad 12V 54"& 180"? 6560-303, Light: LED Quad 12V 54"? 6560-972, Cord: Light MiniDin-7-MiniDin-7, 7' (Yellow) 6000-493, Light: J-300 Corner, Complete. Contains 1 each of A through C below, and 2 each of D and E. A. 6541-341, Tube: LED Corner Light J-300B. 6560-334, Light: Corner, white, 12V J-300 C. 6570-467, Bracket: Light, corner J-300 D. 6570-477, Ring: J-300 Corner lightE. 6541-411, End Cap: J-300 Corner light 6560-978, Lens: Bullet 720 Flange 6541-409, O-Ring: EPDM-111 (for 6560-978) 6541-408, Nut: Plastic Hex, 3/4 (for 6560-978) 6560-347, Wiring harness for J-300 Corner lights (lights not included) 6473-217, Aftermarket J-300 corner lighting kit. Contains 4x 6000-493 (lights), 6560-347 (wiring harness), and 6570-453 (12-pack of light nuts). J-300 Series (2016 - 2019) 6560-972, Cord: Light MiniDin-7-MiniDin-7, 7' (Yellow) 6560-604, Lens: Pillow JT J300, Pin Light (Nut And Gasket Included) J-300 LED Series (2007-2012) 2560-908, Light: Pillow 6560-136, LED footwell assembly including ribbon connector and LED (includes A, B & D). Gaskets (C) purchased separately. Note: You must order the complete assembly to get the LED light. 6541-136, Wall fitting for LED footwell light *Special Order 6540-527, O-Ring (1.67" ID x 0.163", double) Two required *Special Order   Some parts may not be in stock at time of order. Unfortunately, we cannot provide an ETA for special order items. Items placed as Special order are non-refundable, and orders for special ordered items cannot be cancelled. Please see our refund policy at https://www.hottubstore.ca/pages/refund-policy for more information. If a special order item is ordered with other non-special order items, it will delay the entire order.

Some parts may not be in stock at time of order. Unfortunately, we cannot provide an ETA for special order items. Items placed as Special order are non-refundable, and orders for special ordered items cannot be cancelled. Please see our refund policy at https://www.hottubstore.ca/pages/refund-policy for more information. If a special order item is ordered with other non-special order items, it will delay the entire order.   Replacement floating skimmer weir. Compatibility:  2006-2011: All J-400 Series Hot Tubs 2006-2012: J-480, J-470, J-465   6000-625, Skimmer: Weir Long 6540-845, Weir: Float J-400 (Attaches to Skimmer Weir) 2540-049, Basket: Skimmer J-400 6000-579, Vent Ring, Hi-Flow Cartridge Filter *Special order 20069-001, Long Canister: 23.5" with Nut (Fits J-480, J-470, And 5/07+ J-465 Models); Weir Purchased Separately Above 6541-189, Short Canister: 18.5" with Floating Weir And Nut (Fits J460 and 1/07- 4/07 J-465 Models)

*Parts on this page may not be in stock and may be delayed for shipment J-300/J-200 Fixed Bracket 48 Frame (60Hz) Pump Replacement Parts (Prior to June 2009) 6000-031, 2" Split nut6500-232, 2" Straight Union Assembly (includes 2" O-ring)6500-037, 2" 45° Union Assembly (includes 2" O-ring)6500-288, Front Housing for 2.5 hp (all years) and 2.0 hp (July 2003 - December 2009)6500-287, Font Housing for 2.0 hp (1999-June 2003) No longer available6540-171, 1/4-18 NSPM threadx 3/8"Barb, Stainless Steel Adapter (replaces 6540-030) Requires 1x 6540-171 O-ring (below)6540-263, O-ring (0.434" IDx 0.682" OD x 0.125" )6570-070, Self-tapping screw6500-255, Drain plug (1/4" NPSM)6500-256, Drain plug o-ring (0.47" ID x 0.103" )6500-290, Front Housing O-Ring6500-281, Seal (2.0hp 0.625" Shaft, PS200, 2002-June 2006) 6500-805, Seal (2.5hp 0.75" Shaft, PS201, all years) 6500-286, Rear bracket (2.0hp 1999-June 2003) No longer available6500-311, Rear bracket (2.0hp July 2003+, 2.5hp all years)Impellers6500-295, Impeller for 2.5hp (4.129" Diameter)6500-296, Impeller for 2.0hp (3.875" Diameter)6500-309, Impeller for 2.0hp (5.025" Diameter)6500-308, Impeller for 1.5hp (3.65" Diameter) No longer available  Compatibility: 6500-707 (2-Speed), 6500-753 (2-Speed), 6500-754 (2-Speed), 6500-758 (2-Speed), 6500-759 (2-Speed), 6500-761 (2-Speed), 6500-769 (1-Speed), 6500-763 (1-Speed) 

Parts for 2016+ Jacuzzi® J-300™ Collection Pillows. 2016 - 2019 Part ID Description 6455-486 Fastener J-300 Pillow with a plastic push-in screw (2 required) 2020+: Part ID Description 6540-543 Grommet (2 per pillow) and requires 6540-547 6540-547 Wingnut for grommet (2 per pillow) used with 6540-543 Also compatible with: J-445/J-435 (Oct 2017+), J-485/J-475 (2019+) and all J-400 (2020+) 6542-056 Grommet: Pillow (2 per pillow), Solid stem, requires 6540-547. Replaces 6541-987

Compatible with : J-465 2014-2015 J-480 2015 J-575, J-585 2015 6541-561, Escutcheon: Pulsator Jet 6541-562, Jet Face: Pulsator 6541-287, Retainer: Pulsator (Replaces old style) 6540-330, Nozzle: Pulsator Jet 6540-338,  Fitting: Wall Pulsator (Limited Stock) 6660-002, O-Ring: EPDM, 0.859" I.D. x 0.139" C/S 6540-274, Jet Back: Pulsator, Gray (Limited Stock) 6540-061, 90° Elbow, 0.5" Slip x 0.75" Barb. Note: Used in J-480, J-465 2014+