All Hot Tub Parts

Compatible with:  J-LX/LXL Series 2015-2019  J-315 2016+  J-325 2016+  J-355 2014+  J-345 2014+  J-355 2014+  J-365 2014+  J-375 2014+  J-385 2016+  J-415 2014-2019  J-425 2016-2019  J-435 2018+  J-445 2018+  J-465 2016-2017  J-470 2016-2018  J-475 2019+  J-480 2016-2018  J-485 2019+ J-495 2016+ J-575/585 2015+ 6541-132, Jet Face: PowerPro FX2-S Spinner with Stainless Steel Escutcheon 6541-567, Jet Back: PowerPro FX2-S (O-Ring and Nut Included) 6541-644, Washer: 500s (Self Levelling) 6541-110, Jet Back Vortex ||| Jet 2013 *Special Order This product is  a Special Order and is not in stock. Unfortunately, we cannot provide an ETA for special order items. Items placed as Special order are non-refundable, and orders for special ordered items cannot be cancelled. Please see our refund policy at https://www.hottubstore.ca/pages/refund-policy for more information. If a special order item is ordered with other non-special order items, it will delay the entire order.

Air control valves are available for sale for the J-LX hot tub and the J-LXL hot tub. Individual air control components and their specifications are listed below: J-LX & J-LXL Air Control Valve (2011+) J-300 Air Control Valve (2007+) 6541-142, Control: Air Toggle Switch 6541-143, Gasket: Toggle Outer Shell 6541-144, O-Ring: Toggle Inner Shell 6540-375, Manifold: Air Control Jacket 6540-911, Nut: Push Button Air Control 6540-910, Elbow: Push Button Air Control J-300 Air Control Valve (2002-2006) Air control valves are available for sale for the J-300 Hot Tub Series. Individual air control components and their specifications are listed below: 6540-914, Control: Air Push Button 6540-913, Gasket: Push Button Air Control ( 6541-143) Replacement.  6540-522, O-Ring: Push Button Air Control 6540-912, Manifold: Push Button Air Control 6540-911, Nut: Push Button Air Control 6540-910, Elbow: Push Button Air Control  J-LX/J-LXL Air Bleed Line Fitting (2011+) J-300 Air Bleed Line Fitting (2005+) 6540-252, Nut: Air Injector 6540-228, O-Ring: EPDM 0.662" ID x 0.210" 6541-263, Injector: Air PVC Gray

Diverter Valve Knob 2540-533, Knob: T-Valve Compatibility: J-LX/J-LXL: 2007+ J-400: 2007+ (excluding J-485/J-475 2019+, J-445/J-435 Oct 2017+) J-300: 2007+  6540-728, Knob: T-Valve Compatibility: J-300: 2002-2006

Compatible with:  J-210 2012+ 2540-431, Jet Face: 400s Directional (DVX Jet, Grey)1B 2540-433, Jet Face: 400s Directional (DVX Jet, Stainless Steel)1C 2472-610, Jet Face: 400s Rotating - Not Shown (DVX Jet, Stainless Steel)1D 6541-574, Jet Face: Classic PRO Duo Rotator1E 6541-573, Jet Face: Classic PRO Directional 6541-632, Jet Back: 400s (Nut And O-Ring Included) *Special Order 6541-633, Nut: 400s Jet Back *Special Order 6541-634, Washer/Nut: 400s (Self Levelling) 6541-635, O-Ring: 400s - Not available in Canada   Some items are Special Order and is not in stock. Unfortunately, we cannot provide an ETA for special order items. Items placed as Special order are non-refundable, and orders for special ordered items cannot be cancelled. Please see our refund policy at https://www.hottubstore.ca/pages/refund-policy for more information. If a special order item is ordered with other non-special order items, it will delay the entire order.

6540-228, O-Ring: Fits All Temperature Sensors in This Column.

This is for the pillow insert & emblem parts only - the full pillows can be found here Oval pillow insert and emblem for J-300 series hot tubs. 6455-488: Years 2014+ 2455-104: Years 2007-2013  6455-007: Years 2004-2006 You can find your Jacuzzi serial number, model and model year on the product tag often found inside the main equipment bay. On older tubs it may be found on the spa pack, the frame, or sometimes on the floor behind the back cabinet panel. More information can be found here: Where to find my Jacuzzi Serial number.

A. 6455-007, Pillow Insert Only (for 2002-2006) B. 2455-105, Pillow Only (for 2002-2019); Note: Replaced older 6455-006 Pillow  C. 6570-231, Screw: Pillow Attachment (for 2002-2013) (2 req'd)  D. 6570-233, Bushing: Pillow Attachment (for 2002-2013) (2 req'd)  E. 6540-282, Gasket: Pillow Attachment for (for 2002-2013) (2 req'd)  G. 6570-234, Nut: Pillow Attachment (for 2002-2013) (2 req'd) 

Please note: Covermate III parts may not be in stock at time of order Compatibility: Covermate III for J435, J445, J465, J470, J475, J480, J485, J495 100002 - 1x Foam Grip100003 - Coupler100028 - Right Support Arm 100029 - Left Support Arm 101632 - Replacement Shock (Locking)101520 - Replacement Shock (Non-Locking) 100280 - 38" Extender Pivot Arm Find the installation instructions for your Covermate III here.

Please note: These are the Emerson-made version of these pumps. The LX-made pumps are more common (click here for the LX-made versions). You can replace the LX-made pump with an Emerson pump. However, pump parts are not interchangeable. The label will indicate if it is LX or Emerson.     Universal Mounts are available for the J-LX, J-500, J-400, J-300, and J-100 Series hot tubs. Find the specifical hot tub parts and their specifications below:    J-LX/J-LXL/J-500/J-400/J-300/J-100 North America 60Hz  6500-352S Universal Bracket Mount, 1-Speed 6500-365 Universal Bracket Mount, 1-Speed 6500-367 Universal Bracket Mount, 2-Speed 6500-363 Universal Bracket Mount, 1-Speed   Pump Parts Union Assembly, Straight (O- 6500-232 Ring Included) Union Assembly, 45° 6500-037 (O-Ring Included) Union O-Ring (1 ea.) 6000-645 Drain Plug with O-Ring (1 ea.) 6500-547 Screw, Self-Tapping (1 ea.) 6500-548 Housing, Front (Volute) 6500-546 Housing O-Ring 6500-545 Impeller, 2.5hp 6500-549 Seal-Plate, rotation 6500-544 Seal, ceramic, Stationary for North American 60Hz Pumps 6500-543 Rear housing 6500-541 Adapter, 1/4-18 NSPM thread x 3/8" Barb, Stainless Steel 6540-171 **Requires new o-ring 6540-263 O-Ring, 0.434" ID x 0.682" OD x 0.125" 6540-263 Run Capacitor 2.5hp (1&2 Speed Emerson Motors Only) 6000-163

Replacement quartz tube for all years of Jacuzzi® Hot Tubs & Sundance® Spas

6570-119, Grill: Left Lift Hinge Kit (For 6570-381 Grill) 6570-071, Grill: Right Lift Hinge Kit (For 6570-381 Grill) 6570-061, Magnetic Latch Plate (For 6570-381)  6570-116, Strike plate for 6570-061 6570-122, Clip: (Two Required for 6570-381 Grill) 6570-220, Screw 8-32 x 3/8" PHP Nylon (Two Req'd for 6570-061 Magnetic Latch)  6570-219, Nut: 8-32 x 3/8" Hex Nylon (Two Req'd for 6570-061 Magnetic Latch)  6570-381, Grill: Jacuzzi 2011 .This Product is a Special Order and is not in stock. Unfortunately, we cannot provide an ETA for special order items. Items placed as Special order are non-refundable, and orders for special ordered items cannot be cancelled. Please see our refund policy at https://www.hottubstore.ca/pages/refund-policy for more information. If a special order item is ordered with other non-special order items, it will delay the entire order.

IX Jet (*For 10/17+ J-445 & J-435 Models Only) 6541-013‡, Jet Face: Assembly IX Jet (No LED Lighting) 6540-420, Pipe, Flex 2" (1.25' Long) 20178-001‡, Venturi Tee, Pre-Assembled, 1.5" x 2" 6570-033, Clamp, 27mm 6540-065, Adapter 1" Spigot x 0.75" Insert 20216-001‡, Valve, Check, 0.75" Air   IX Jet for 2013+ J-400 Series 6560-970‡ 09/2015+ Jet Face: Assembly IX Jet w/ Multi-Color LED Light And Mini-DIN Connector for 12V Balboa controllers ONLY. Not compatible with older systems 6540-520, O-Ring: Double EDPM, 3.312"ID x 0.21" (2 Req'd.) 6540-861, Nut: T-Valve 6540-443, Nut: Serviceable Light 6540-390, Pipe: Rigid PVC, 2" (Sold by The Foot). 20178-001‡, Venturi Tee: 1-1/2" Spigot x 2" Slip x 3/4" Barb     IX Jet (2006-2012 J-400 Series) 6560-103‡, Jet Face: Assembly IX Jet w/Multi- Color LED Light And Mini-DIN Connector; 6000-362 Adapter Cable 6540-520, O-Ring: Double EDPM, 3.312" ID x 0.21" (2 Req'd.) 6540-861, Nut: T-Valve 6540-390, Pipe: Rigid PVC, 2" (Sold by The Foot). 20178-001‡, Venturi Tee: 1-1/2" Spigot x 2" Slip 3/4" Barb   ‡Please note: These parts are special order and are not eligible for cancellation, refund or exchange.  Please reach out to our team if you need to verify the part you require.

J-300 Wall Suction Fitting (2004+) 6540-213, Filter: Spa Drain Cover; Note: Not Used After June 2008 6540-564, Grate: Suction 6540-565, Fitting: Wall  Suction (Nut and 6000-564 Screw Included) 6540-620, O-Ring: Compression (Replaced 6540-520 O-Ring) 6540-619, Washer: Self Levelling Suction Assy. 6000-564, Screw: 8-32 x 12mm, 316SS J-300 Series Skimmer/ Filter Wall Fitting (2002+) 6540-126, Fitting: Wall with High Flow Strainer (for High Flow Circ. Models); OR 6540-751, Fitting: Wall with Strainer (for Low Flow Circ. Models) 6540-753, Fitting: Wall w/o Strainer (Jet Pump 1) 6540-984, O-Ring: 2.85 ID x 0.21" C/S Double EPDM (2 Req'd.) 6540-791, Nut: 2" 6540-241, Reducer: 2" Spigot x 1/2" Slip (for Low Flow Circ. Models) 6540-085, Elbow: 1/2" Spigot x 3/4" Barb (for Low Flow Circ.Models)   J-300 Series Wall Suction (2002-2003) 6540-113, Filter: Spa Drain Cover   J-300 Filter Fill Fitting 6540-329, Filter: Fill Fitting (Reduces Air Locks During Refills). J-LX, J-500, J-400 (2006+) Wall Suction Fitting 6540-564, Grate: Suction 6540-565, Fitting: Wall Suction (Nut and 6000-564 Screw, Included) 6540-620, O-Ring: Compression, 2"  6540-619, Washer: Self Levelling Suction Assy. 6000-564, Screw: 8-32 x 12mm, 316SS J-LX, J-500, J-400 (2006+) Skimmer/Filter Wall Fittings 6540-126, Fitting: Wall With High Flow Strainer 2011 (for Circulation Pump) 6540-753, Fitting: Wall w/o Strainer (for Jet Pump 1) 6540-984, O-Ring: 2.85 ID x 0.21" C/S Double EPDM (2 Req'd.) 6540-791, Nut: 2" Suction Fittings (J-400 Series) J-400 Filter Fill Fitting 6540-329, Filter: Fill Fitting (Reduces Air Locks During Fill u

  6560-860, Switch: Flow Assembly for J-300 LCD Series with Box End Connectors; Used on: J-350, J-360, J-370, J-380 LCD Models (2002-2003) J-355, J-365, J-375, J-385 LCD Models (2004-2006) 6560-852, Switch: Flow Assembly with "slip" end connectors (Note: requires 2x adapter: 6540-262 below)Used on: J-310 (2002-2003) J-315 (2004-2015) J-325 (2004, 2007-2015) 6540-262, Adapter: 3/4" barb x 3/4" spigot (2 required for 6560-852 replacement).   6600-069, Harness: pressure/Flow Switch 90" Cable

  Compatibility: 06/2014+ 680 McKinley and Ramona 2013+ 680 Edison 2012+ 680 Peyton 1. 6560-581, Lens, Bullet 1" 2. 6541-433, Washer: .95 OD x .40 ID x .075 (replaced 6540 -368 8.31.20) 3. 6540-384, Nut: 3/8-16 Hex 4. 6541-000, O-Ring: .285"O.D. Replaces part number 6541-688 above 5. 6541-689, Nut: Compress Hex Dome  6541-647, Pin light with nut (limited stock) 6541-648, O-ring (limited stock) 6540-368, Washer: 0.9"O.D. x 0.4"I.D. x 0.075"(Silicone Rubber) (replaced by 6541-433)  6541-688, O-Ring: 5/16"O.D.  (replaced by 6541-000) 6560-558, Light: LED Quad 36"x 38"Daisy (2012+ J-280, J-275, J-270, J-245, J-235 Models Only)