Cover Lifters (20)

This model allows the open cover to rest in a lower position for a slightly less-obstructed view. The CoverMate II is slid underneath using the understyle bracket system. Features & Specs Requires Just 18 Inches of Clearance Behind the Spa and 5 Inches on Each Side Powder-Coated, Aluminum Tubing with Easy-To-Install, Non-Corrosive Mounting Brackets Understyle System Uses Two Aluminum Brackets and 7-Inch Base Plates that Simply Slide Under the Spa Comes Standard with A Towel Mate Accessory for Hanging up To Three Towels Right Where They Are Needed Most Works on Spas up To 8 Feet in Length or Width and 40 Inches in Height (from Ground to Top of Hot Tub) Compatible: Jacuzzi J-200 & J-300 View Install Guides Here -  Https://www.leisureconcepts.com/installation-instructions/

Cover Catch - The Simple Solution to Cover Storage The CoverCatch is the perfect answer for keeping the cover close-by and off the ground. Install the arms low on the spa for an unobstructed view, or higher for added privacy. Ideal for the smaller sized spa and cover. Features & Specs Requires just 10 inches of clearance behind the spa Arms fold flat against spa when not in use Powder-coated aluminum tubing with easy-to-install, non-corrosive mounting brackets Works well on most smaller spas regardless of shape Foam-rubber pads provide soft, slip-free surface for the cover to rest on Arms measure 7 1/2" deep

Jacuzzi® Play Cover Lift Assembly

THE COVER LIFT SOLUTION FOR ROUND AND UNIQUELY SHAPED SPAS Thanks to our exclusive, adjustable mounting base that slides beneath the spa, the CoverMate Freestyle delivers when other lifts can't.   FEATURES & SPECS Requires approximately 20 inches of clearance behind the spa Designed to work on round and uniquely shaped spas Adjustable mounting base simply slides under the spa Powder-coated, aluminum tubing with easy-to-install non-corrosive mounting brackets Works on nearly any spa between 26 to 42 inches tall and 74 to 95 inches wide     View install guides here -  https://www.leisureconcepts.com/installation-instructions/

The CoverMate Vanish XL provides smooth, fluid opening and closing, with a contemporary design that visually incorporates the lifter into the spa cabinet and offers a 360 degree view by positioning the cover behind the spa when in the open position. Effortless operation and function with integral design makes the Vanish XL the future of spa cover lifters and a must for every showroom. FEATURES & SPECS Cover is glued to the lifter for a neater look and precision placement Requires just 25 inches of clearance behind the spa Low-profile positioning provides a near zero-obstructed view Ultra-modern, sleek and compact design that visually incorporates the lifter into the spa cabinet Made of strong polymer resin Simple, quick and easy installation Versatile design allows the cover bracket to screw mount to covers containing an internal metal mounting plate Hydraulic shocks provide effortless opening and closing Smooth, fluid opening and closing of the spa cover Extended pivot arms and cover brackets are available for use on spas with a raised back design   Compatible:  J-445, J-435, J-425 View install guides here -  https://www.leisureconcepts.com/installation-instructions/