Parts

The CLEARRAY® system uses UV-C technology to neutralize waterborne pathogens, rendering them useless. CLEARRAY® will also help reduce the amount of sanitizer you use in your hot tub, providing you with clean, fresh clear water. For the cleanest, softest water possible. No more drying out, no more red-eye.  The CLEARRAY® bulb needs to be replaced once a year. Detailed instructions on replacing your ClearRay bulb can be found here.   Replacement recommended every 12 months. 

J-LX & J-LXL Series (2011+) Assembly Used on 2020+ J-425 & J-495, 2019+ J-485 & J-475 and 10/2017+ J-445 & J-435 6540-439, Knob: Diverter J-445, 2017 6540-455 Nut: Diverter J-400 (Grey) 6540-865, O-Ring: Diverter Cap 6540-868, O-Ring: Diverter Stem, 0.591" I.D. 6540-550, O-Ring: Diverter Gate, 2.175 I.D. 6540-568 (2/16/18+): Gate: T-Valve, 2018 (6540- 550 O-Ring Purchased Separately) 6541-014, Fitting: Wall T-Valve J-400 (Clear) 6560-320, Light ring: Diverter Top HT This item is not stocked and made to order. Final sale (not eligible for a refund). 6560-312, Nut: J400 (Clear) 6540-560 (2/16/18+), Body: T-Valve 2018  Assembly Used on All other 2016+ J-400 Models 2540-533, Knob: Diverter (2007+ J-400/J-300) 20090-001, Knob: Diverter (2006 J-400 Series) 6540-729, Cap: Diverter (All 2002+ Models) 6540-865, O-Ring: Diverter Cap 6540-868, O-Ring: Diverter Stem, 0.591" I.D.  6540-550, O-Ring: Diverter Gate, 2.175 I.D. 6540-568 (2/16/18+): Gate: T-Valve, 2018 6541-969, Fitting: Wall Diverter 6540-968, Nut: Diverter 6540-560 (2/16/18+), Body: T-Valve 2018, replaced 6540-967 

J-LX/J-LXL/J-500/J-400/J-300/J-200/J-100 North America 60Hz Bracketless LX 56 & 48 Frame Pump Parts (5/2009+)   Compatible Pumps (LX Version; Not Emerson) 6500-352S 6500-365S 6500-367S 6500-363S 6500-845S 6500-090S 6500-357S   6500-232 Union Assembly, straight (o-ring included) 6500-037 Union Assembly, 45 degree (o-ring included) 6000-645 Union o-ring 6500-601 Screw, Self-Tapping (1 ea) 6500-602 Drain Plug 6500-603 Drain Plug O-Ring 6540-171 Adapter, 1/4-18 NSPM thread x 3/8" Barb, Stainless Steel (replaced 6540-030) 6540-263 O-Ring, 0.434"ID x 0.682" OD x 0.125"  6500-604 Housing, Front (Volute) 56FR 6500-605 Housing O-Ring 6500-612 Impeller, 2.5hp (Used on 1 & 2 Speed Motors) 6500-281 Seal-Stationary ASM (PS200) 6500-606 Housing Rear 56FR 6500-613 Run Capacitor 2.5HP (for 1 & 2 speed LX motors ONLY)

Has your cover lifter become damaged or ruined? We have replacement parts that can restore your cover lifter and have it working properly agian. Individual part information and descriptions are below:  Pivot Arm - Length: 26"; Direct replacement for the original bar on the CoverMate I - Part # 100004 Extended Pivot Arm - Length: 33"; Direct replacement for extended arm on the CoverMate I - Part # 100591 Support Arm - Direct replacement for support arm on the CoverMate I Coupler - Direct replacement for coupler on the CoverMate I and CoverMate 3 Plastic Bracket Kit - The Bracket Kit includes the Plastic Left & Right Brackets, and Screw Kit. Plastic Bracket - This is the replacement plastic bracket - Part # 100021 Plastic Screw Kit - All the screws, bolts and plastic screw caps to completely replace broken or misplaced parts you may need on your CoverMate 1 cover lifter.  Foam Grip - Part # 100002  

Has your cover lifter from Cover Mate become damaged or ruined? We have replacement parts that can restore your cover lifter and have it working properly again. Individual part information and descriptions are below:  Pivot Arm - This arm is 31"and is a direct replacement of your original bar. The pivot arm is the bar that connects the cover lifter to the bracket mounted to the hot tub. 38" Extended Pivot Arm for CoverMate III 48" Extended Pivot Arm for CoverMate III Right and Left Support Bar - direct replacement of the original right or left arm Coupler - direct replacement of the original coupler Plastic Screw Kit - has all the screws, bolts, and plastic screw caps you need completely replace currently broken or misplaced parts.  Left and Right Plastic Bracket - direct replacement of the original bracket DeckMount L Bracket - Bracket kit is used to mount the Leisure Concepts CoverMate III cover lifter to your deck Small Black Dome Caps - Package of 50

J-300 Models 2020+ 6541-344, Knob: Diverter, J-300 2020 6540-434, Nut: Diverter HT(Discontinued) Replaced by 6540-455 6540-865, O-Ring: Diverter Cap 6540-868, O-Ring: Diverter Stem, 0.591" I.D. 6540-550, O-Ring: Diverter Gate, 2.175 I.D.  6540-568, Gate: T-Valve, 2018 6541-969, Fitting: Wall Diverter 6540-968, Nut: Diverter 6540-560, Body: T-Valve 2018  Assembly Used on All other 2016+ J-300 Models 2540-533, Knob: Diverter (2007+ J-400/J-300) 20090-001, Knob: Diverter (2006 J-400 Series) 6540-729, Cap: Diverter (All 2002+ Models) 6540-865, O-Ring: Diverter Cap 6540-868, O-Ring: Diverter Stem, 0.591" I.D.  6540-550, O-Ring: Diverter Gate, 2.175 I.D. 6540-568 (2/16/18+): Gate: T-Valve, 2018 6541-969, Fitting: Wall Diverter 6540-968, Nut: Diverter 6540-560 (2/16/18+), Body: T-Valve 2018, replaced 6540-967 

101632 Locking replacement shock for CoverMate 3  101510 Non-locking replacement shock for CoverMate 3

J-300 Series 2016+ 6560-905, 2016+ Waterfall (12VDC): Kit with Mini-DIN Connector (Body, Cover And Nut Included); Note: Gasket purchased separately below. 6541-068, 2014+ Waterfall Cover; 2540-906, Gasket: Waterfall 2560-904, Nut: Waterfall 2014/2015 6560-125 2014-2015 Waterfall (15VDC): Kit with Mini-DIN Connector (Body, Cover And Nut Included); Note: Gasket Purchased Separately Below. 6541-068, 2014+ Waterfall Cover; 2540-906, Gasket: Waterfall 2560-904, Nut: Waterfall 2007-2012 2540-904, Waterfall: Complete Kit (no longer available) 2540-905, Waterfall cover (no longer available) 2540-906, Waterfall gasket 2560-904, Waterfall nut

1. Classic Direct - 200s Jet (DX Jet) 2. Classic Euro - 200s Jet (DL Jet) 3. Classic Pulsator - 200s Jet (DV Jet) 1a. 2540-261, Jet Face: 200s Micro (DX Jet, Grey) 1b. 2540-265, Jet Face: 200s Micro (DX Jet, Stainless Steel) 2a. 2540-251, Jet Face: 200s Accu Pressure (DL Jet, Grey) 2b. 2540-255, Jet Face: 200s Accu Pressure (DL Jet, Stainless Steel) 3a. 2540-241, Jet Face: 200s Pulsator (DV Jet, Grey) 3b. 2540-245, Jet Face: 200s Pulsator (DV Jet , Stainless) 4. 6541-612, Jet Back: 200s (Nut And O-Ring Included) 5. 6540-854, O-Ring: 200s 6. 6541-614, Washer: 200s (Self Leveling)

Waterfall Valve (For J-475, J-485, 2019+ J-435, J-445 & 2020+ J-425, J-495 models) 6540-695, Knob: Waterfall J-475/J-485 6541-081, Valve: Waterfall, 3-way 1" without knob IX Jet Valve (Pre-2019 J-445 & J-435 models**) 6540-451, Knob: Waterfall J-445 20241-001, Valve: 90°, 2-Way, 1-1/2" Slip Waterfall Valve (Pre-2019 J-445 & J-435 models**) 6540-451, Knob: Waterfall J-445, 2017 6000-298, Valve: Replacement 3-Way Waterfall Valve Stem Assembly (Includes item 2a)  (includes  6541-069, T Gasket)2a. 6570-462 Replacement C-Clip: Waterfall Valve 6000-506, O-Ring for 3-Way Waterfall Valve 6541-069, "T" Gasket for 3-Way Waterfall Valve 20172-001, Valve: Plumbing 90o, 3-Way, 1-1/2" Slip (Complete); Note: Knob Purchased Separately Waterfall (for All J-485, J-475, J-445 & J-435 models and 2020+ J-425, J-495 models) 6560-119, Cover: 1 Waterfall LED Light J-400, 2017 6473-310, Base; ABS Waterfall Assembly (Complete) Note: Includes Body, Barb 2 Fittings, compensating washers, and Mounting Nuts. IX Jet Valve (2006+ J-400 Series EXCEPT for J-435 & J-445) 20150-001, Knob: 2006+ 1 J-400 Waterfall Valves & Waterfalls (J-400) Waterfall Valve (2006-2019 J-400 Series*) 20241-001, Valve: 90°, 2-Way, 1-1/2" Slip Waterfall Valve (2006-2019 J-400 Series*) 20150-001, Knob: 2006+ J-400 Waterfall 6000-298, Valve: Replacement 3-Way Waterfall Valve Stem Assembly (includes  6541-069, T Gasket) 6000-506, O-Ring for 3-Way Waterfall Valve 5  6541-069, "T" Gasket for 3-Way Waterfall Valve 20172-001, Valve: 90o, 3-Way, 1-1/2" Slip (Complete); Note: Knob Purchased Separately. Waterfall (2006-2019 J-400 Series*) 20095-001, Cover: Waterfall J-400 Series 6541-063, Fill Spout: Waterfall "Niagra" J-400 Series (Includes 2 Nuts And 2 Self-Leveling Washers) 6540-935, Gasket: 1.25" ID "Niagra" J-400 (2 Req'd.)

Compatible with:  J-LX/LXL Series 2015-2019  J-315 2016+  J-325 2016+  J-355 2014+  J-345 2014+  J-355 2014+  J-365 2014+  J-375 2014+  J-385 2016+  J-415 2014-2019  J-425 2016-2019  J-435 2018+  J-445 2018+  J-465 2016-2017  J-470 2016-2018  J-475 2019+  J-480 2016-2018  J-485 2019+ J-495 2016+ J-575/585 2015+ 6541-132, Jet Face: PowerPro FX2-S Spinner with Stainless Steel Escutcheon 6541-567, Jet Back: PowerPro FX2-S (O-Ring and Nut Included) 6541-644, Washer: 500s (Self Levelling) 6541-110, Jet Back Vortex ||| Jet 2013 *Special Order This product is  a Special Order and is not in stock. Unfortunately, we cannot provide an ETA for special order items. Items placed as Special order are non-refundable, and orders for special ordered items cannot be cancelled. Please see our refund policy at https://www.hottubstore.ca/pages/refund-policy for more information. If a special order item is ordered with other non-special order items, it will delay the entire order.

Diverter Valve Knob 2540-533, Knob: T-Valve Compatibility: J-LX/J-LXL: 2007+ J-400: 2007+ (excluding J-485/J-475 2019+, J-445/J-435 Oct 2017+) J-300: 2007+  6540-728, Knob: T-Valve Compatibility: J-300: 2002-2006