Jacuzzi Hot Tub Parts

Note: This product has been discontinued, however, we have some remaining stock.  6560-577, Light: LED Cup Holder with Ribbon connector Compatible with: J-495: 2012J-480: 2006-2012J-470: 2006-2011J-465: 2006-2012J-460: 2006-2012J-415: 2012 J-375: 2007-2012J-365: 2007-2012J-355: 2007-2012J-345: 2007-2012J-335: 2007-2012J-325: 2007-2012J-315: 2007-2012

6570-198, Bracket for controller BLB 4" (Fits 2016+ J-345 and J-335 models)

Nut: Wing nylon pillow Screw: Nylon SKT HD cap pillow

300038, Waterfall; Adjustable, chrome, with valve, complete. Includes 400038 below 400038-ESC, Face plate ONLY; Chrome, waterfall

Please Note: *This item is sold only as a kit which includes all necessary seals and mounting hardware. **This kit may no be in stock at the time of order, delays may occur.  Contact us to verify availability. 6560-214

1.375" Plastic plug for electrical access hole 1.375" Universal bushing for electrical access

Please note: Some of these parts may not be in stock, and shipments may be delayed. Stereo components for Jacuzzi J-500 models from 2015+.   6500-917, Bluetooth stereo deck (includes 6560-813) Replaces: 6500-915 6560-813, Bluetooth antenna cable (39") 6530-500, Jacuzzi stereo logo 6600-186, Power supply: 13VDC 6560-496, Wiring harness 6560-437, 2" Speaker (aquatic, neodymium) with blue drain hose attached 2570-386, Speaker grill for 6560-437 (above) 6560-913, Subwoofer 6560-812, AM/FM antenna wire (6')

Pin Light Lenses for Jacuzzi J-200 & J-300 Series Hot Tubs. 6560-454, 1" LED Spot Fitting (Square) 6541-857, 1" Grommet for lens (Square) Compatibility Jacuzzi J-300 Series Hot Tubs (04/24/2023+) Jacuzzi J-200 Series Hot Tubs (2023+)

J-500 LCD Series (06/2018+) 6600-381, Panel: LCD J-500 06/2018+; Encrypted. Works with both 06/2018+ encrypted circuit boards, and 2015- 05/2018 non-encrypted boards. J-500 LCD Series (2015-05/2018) 6600-348, Panel: LCD J-500 2017; with 8' Cable. Replaces 6600-347 and 6600-100. 6000-438, Gasket: J-500 Panel 3M 300LSE

Please note: circuit boards may not be in stock at the time of order and delivery may be delayed. Please contact our team to confirm current stock. J-400 North American 60Hz Models (04/2018+) 6600-478 All 2019+ J485, J475, J445, J435, and 2020+ J425 models. Encrypted board. It will not work with older control panels. 6600-422 All 1 or 2-Pump J-400 models 04/2018 - 2019, EXCEPT J-435/J-445/J-475/J-485. Encrypted board. It will not work with older control panels. When used in pre 04/2018 spas need to be reprogrammed with the Pick-iT kit. 6600-430 J-435/J-445 models 04/2018-2018. Encrypted board. Will not work with older control panels. When used in pre-04/2018 spas needs to be reprogrammed with Pick-iT kit. 6600-476, All 3 Pump J-400 models 04/2018+. Encrypted board. Will not work with older control panels. When used in pre-04/2018 spas needs reprogrammed with Pick-iT kit. J-400 LCD Series (09/2015-03/2018) 6600-766 All 09/2015-03/2018 1&2 Pump J-400 models (Not Compatible with 10/2017+ J-445 & J-435 models). Board is microprocessor controlled, includes factory-installed jumper wires and does not require an Eprom. 6600-266 For 2-Pump Domestic 60Hz J-445 & J-435 10/2017-3/2018 models only. Board is microprocessor controlled, includes factory installed jumper wires and does not require an Eprom. 6600-768 All 09/2015-03/2018 3-Pump J-495 models. Board is microprocessor controlled, includes factory installed jumper wires and does not require an Eprom. J-400 Export 50Hz Models 6600-765 All 09/2015-03/2018 1&2 Pump J-400 models (Not Compatible with 10/2017+ J-445 & J-435 models). Board is microprocessor controlled, includes factory installed jumper wires and does not require an Eprom. 6600-767, All 09/2015-03/2018 3-Pump J-495 models. Board is microprocessor controlled, includes factory installed jumper wires and does not require an Eprom. J-400 LCD Series (2006-08/2015) 6600-728, All 2008-Mid 12/2009  1&2 Pump J-400 models with 1-speed Jet Pump Board is microprocessor controlled and does not require an Eprom.

J-500 Series 2015+ 6560-196, Adapter, DCU Expansion Box 2015 6560-912, Light Engine: Fiber JHT/SD 2015 6560-146, Light: Footwell LED Multicolor J500, 2015 (Nut And O-Ring Included) 6570-206, Bracket, J500 Corner Light 6560-911, Light: Exterior Corner JHT/SD 2015 6560-199, Cord: MiniDin-6 to XA Connector 6560-821, Fiber optic: Internal Perimeter Light 6541-828, Channel: Internal Perimeter Light J-500 6541-823, Complete KIt: Internal Perimeter Light, Right (2 Pieces, O-Rings & Hardware included) 6541-824, Complete KIt: Internal Perimeter Light, Left (2 Pieces, O-Rings & Hardware Included)  

J-485, J-475, J-445, J-435 2019+ & J-495, J-425 Models 2020+ 6000-494, Light, J400 Corner: Complete Assembly (Contains items 1 through 6 below). 1. 6570-429, Bracket: Corner light 2. 6560-526, Light: Corner, white 12V 3. 6540-586, Tube LED: Corner light 4. 6560-357, Housing: Corner light 5. 6540-585, End Cap: Corner light 6. 6540-613, End Cap: Angled, corner light 6473-213, Corner light kit, aftermarket, complete. Contains 4 each of parts 1 - 6 above.

Diverter valves for the J-500 Series (2015+) hot tubs are available to order. Diverter valve replacement parts include the knob and mounting nut as well as the O-ring. Full details are below:  6541-029, Valve: J-500 Diverter (Knob And Mounting Nut 2 Included) 6540-511, O-Ring: EDPM 2.85" ID x 0.21" C/S (2 Required)

6540-859, Injector: Bowles, Ozone; Fits All 2005+ Models

Aftermarket ClearRay Pro3Tect Ozone Kit for 240V Jacuzzi Hot tubs. Compatibility with 240V tubs only: J-500: All J-400: 2016+ J-300: 2016+ J200: 2018+ J100: 2018+ Includes all necessary components, hardware and instructions for installation. 6472-529, 240V, AMP circuit board connection; complete ozone kit.